Reach is introduced during Jesse’s ritual in The Subway Fault, accessed from Railyard Street Station in the Evacuation Zone. Complete the training and use the grapple points to return from the tunnels.
From Railyard Street Station to Reach
Approach the Fault entrance at Railyard Street Station to start the mission. Descend into the subway and pass the train crossings. Shift offers an alternative crossing route if already unlocked; it is not listed as the mission’s entry requirement.
Continue through the Mold encounters. At the large pit, descend while avoiding trains, reach the enemy platform opposite your entry, and pass its rear door. The TV in the next room opens the Fault.
Find Jesse on the platform. Reach is introduced during the ritual; practice the anchors, then use elevated points to climb out after leaving the Fault. A distant point may become reachable after jumping and gliding.
On the return route, continuing straight at the checkpoint branch leads to the Patterned Metro Tunnels fast travel door. Activate it before leaving.
What Reach does
Reach lets Dylan connect to grapple points across gaps and altered spaces. It covers movement that a normal jump cannot clear and that Shift cannot solve by changing surface orientation.
Frame the anchor in the camera, wait for the usable state, then activate Reach. Continue steering after the pull because some routes expect a chain rather than a single automatic landing.
Why Reach matters in Underpass
The campaign checks The Subway Fault during Recursions and Iterations, and Reach supports the routes that move Dylan deeper into Underpass. It also reduces wasted searches around gaps that intentionally have no bridge.
A visible anchor is stronger evidence than a nearby staircase. When the environment presents repeated grapple points, complete the Fault instead of trying to bypass the route.
Reach and Shift solve different problems
Shift changes how Dylan travels across gravity surfaces. Reach pulls him toward designated anchors. Many late routes combine the two, but neither is a direct replacement for the other.
If the prompt is absent, identify the environmental cue first. A folded wall suggests Shift; a distant anchor suggests Reach; a sealed panel requires an impact or fire solution.
If a Reach point will not activate
Verify The Subway Fault is complete and move until the anchor is unobstructed. Check whether the current objective must advance before that specific route becomes active.
Reloading is an unverified troubleshooting suggestion, not a confirmed repair. It cannot grant an ability the save has not unlocked.
How this guide was checked
The station approach, ritual timing, and return route follow PowerPyx’s Subway Fault walkthrough, reviewed October 8, 2026. No first-hand route test is claimed. Follow the current on-screen Reach binding rather than assuming one controller layout.